As the only Alu-Rex Certified Installer in your region, we install gutter guard systems built for the specific abuse our climates deliver: leaves and pine needles in the fall, snow and ice load all winter, shingle grit and cottonwood fluff the rest of the year. A guarded gutter stays open, which means water goes down the downspout instead of over the edge and into your foundation.
We carry two primary Alu-Rex systems and a retrofit option, and we recommend based on your roof, your trees, and the condition of your existing gutters rather than pushing one product at every house.
Alu-Rex T-Rex: continuous hanger strength
Traditional gutters hang from spiked nails or spaced hangers, which leave long unsupported stretches that sag and pull away under snow and ice. The T-Rex system replaces spaced hangers with a continuous hanger that reinforces the gutter along its entire length while enclosing the top against debris. It is the system we recommend for homes that carry real snow load.
- Supports up to 232 pounds per linear foot
- Continuous reinforcement, no weak sections between hangers
- Blocks leaves, needles, shingle grit, and roof debris
- Resists sagging, warping, and pull-away through freeze-thaw cycles
- Backed by a lifetime structural warranty and a 25-year clog-free warranty
Alu-Rex DoublePro: microfiltration for wooded lots
Some debris is too fine for a standard guard. Pine needles work through single perforations, and shingle grit builds up into a sludge that chokes flow. The DoublePro system answers with dual-membrane microfiltration: two filtering layers that stop fine debris on top while water passes through, mounted on the same continuous hanger construction for strength.
- Dual-membrane microfiltration stops pine needles and shingle grit
- Continuous hanger reinforcement along the full gutter length
- Engineered for snow, ice, and freeze-thaw cycles
- Our first recommendation for heavily wooded or tree-dense properties
Which system fits your house
Heavy snowfall, extreme weather, or a gutter that needs structural reinforcement points to T-Rex. A lot surrounded by pines and cottonwoods, where fine debris is the enemy, points to DoublePro. If your existing gutters are sound and you want protection without replacing them, the Alu-Rex Gutter Clean Pro retrofit guard adds two layers of perforated aluminum filtration over the gutters you already have. We sort this out during a free on-site look at your roofline, not over the phone.
Why certified installation matters
A guard only performs when the gutter under it is pitched, fastened, and sealed correctly, and when the guard itself is fitted to the profile rather than forced onto it. Certification means our crews install these systems to Alu-Rex's own standards, which is what keeps the warranties intact and the gutters clear. Most homeowners with guards go from cleaning gutters several times a year to checking them once or twice.
Specifications
| T-Rex load capacity | Up to 232 pounds per linear foot |
|---|---|
| T-Rex warranty | Lifetime structural, 25-year clog-free |
| DoublePro filtration | Dual-membrane microfiltration |
| Retrofit option | Gutter Clean Pro, dual-layer perforated aluminum |
| Installer | Alu-Rex Certified |
We are the only Alu-Rex Certified Installer in your region, and certified installation is what keeps these warranties intact.
Guard InstallationRelated Products